Fiat Cinquecento Trepiuno Concept

Concept Cars 12 Feb 2004
Fiat Cinquecento Trepiuno Concept

At the 74th Geneva Motorshow, Fiat will introduce the ‘Fiat Trepiùno’, the concept car designed by the Fiat Style Centre to represent the theme of ‘back to the future’. The prototype is a modern reworking of the cars that marked the first wave of mass motorisation in Italy.

In fact the ‘Fiat Trepiùno’ prototype, immediately conveys the idea of compactness. This is due to a side section made up of several overlapping layers and a shell-shaped roof that looks much smaller than the sides when viewed from above. The car’s specific proportions and certain external traits give it a fun appearance that also conveys a clear impression of solidity and sturdiness.

Working with a total length of just 3.3 metres, the designers lengthened the passenger compartment to obtain a pleasing shape that features a very airy side view, a very short bonnet and minimal wheel overhang.

The bonnet is wrapround type and folds over the sides while the omega-shaped rib, now as then, fills the front end without adding any grilles or friezes. Due to its compact size and generous track dimensions, the ‘Fiat Trepiùno’ is also distinctive for its sporting, dynamic appearance.

All these retro hints share one specific characteristic: no motif has been re-used on the ‘Fiat Trepiùno’ before considering its usefulness on a present-day car, reviewing its functions and materials or even finding it new applications.

For example, the two headlights set into the front end are accompanied by two supplementary lights that are the very essence of cutting-edge technology. The tail-lights, on the other hand, work with LCD screens that display readings in graphic mode: and so communication passes from the car’s interior to its exterior.

Another example of reworked style is the famous canvas hood found in some superminis of the past that has been interpreted by a Sky-dome on the ‘Fiat Trepiùno’. The large window, continuous with the windscreen, stands in for the roof in linear and airy manner while emphasising the two arched pillars.

The rear end reproposes on the ‘Fiat Trepiùno’ a tailgate with a higher threshold that incorporates the rear window and roof spoiler. The solution adopted is very practical for loading and unloading everyday items.

And so from the exterior to the interior. The designers devoted the greatest attention to details without ever losing sight of the simplicity that is the keynote of the new car. Simplicity does not mean stripped bare, however, but exemplifies a particular approach to styling and construction where the aim is simplified use.

The result is an airy, spacious passenger compartment, a place where you can live well and be at your ease throughout the time you spend in your car. And it is also a welcoming, protective place due to the broad ring that delimits the entire interior space.

The appointments include front seats of minimum thickness that offer more comfort than seats with conventional padding. They are made out of a layer of soft polyurethane that is complemented by a more rigid polyurethane structure to create a flexible, comfortable three-layer structure able to absorb all loads and, above all, not detract from the volume and space.

The seats allow so much room in the back that two further places can be created through a clever arrangement of backrests and cushions. For example, the split backrests fold forward to create the customary extended load compartment. Or they can be turned up to cover the extended boot area from prying eyes.

All this makes it possible to reconfigure the interior to suit the car’s various applications and also to accommodate tall people in the back. In a normal 3+1 configuration, the front passenger seat is moved so far forward that it is almost swallowed up by the facia. The facia can be deflated by means of a conversion process to leave room for the front passenger’s legs. This makes more room available for people in the corresponding rear seat.

New material technology has made the ‘Fiat Trepiùno’ the first car to transcend the classic ‘2+2’ arrangements of certain coupés or open-topped sports cars and also the configurations of many city cars that limit passenger room to just two seats in the front. The prototype has thus made it possible for the 3+1 concept to be introduced for cars with little room in the back. This has been achieved through an innovative structure, able to adapt to the most common transport needs and satisfy the greatest number of users: 2 seats, 3 seats, 3+1 emergency seat. To sum up, the Fiat prototype joins the boot compartment to the facia by means of a set of possible conversions that effectively make the interior fully reconfigurable.

The facia deserves a section of its own due to its shape and functional potential. In fact the ‘Fiat Trepiùno’ proposes an innovative solution that can incorporate the structure and equipment of a present-day dashboard.

The upper area therefore accommodates 2 drawers while the controls on the central console are under a film. All you have to do is brush them with your fingers and a light will follow your movements and receive your input. A liquid crystal display extending from the same console shows the menu of another one-touch multifunction control. This control is located between the front seats so that it can be used in intuitive, simple manner without dropping your gaze from the road. Light is also used to ensure the driver obtains a response to any operation: air conditioner temperature or main service activation. Night-time driving and night-time passenger compartment perception are also aided by lights through the use of LEDs concealed in the floor and door pouches.

An original design, then, to meet a new post-modern consumer trend that reworks retro shapes and styles to meet present-day needs. It is evident in fashion, music, furnishing and lifestyle: the term ‘post-modern’ surfaced at the end of the Nineties and inspired designer collections throughout the world. A look that juxtaposes retro smells and colours with up-to-the-minute symbols, objects and styles. A mixture of past and future, a style and construction movement that moves away from mass production to create a unique object.

Fiat Auto thanks the following for their help in the production of this concept: Bosch, Ficosa, Hitachi, I.D.E.A. Institute, IXFIN Magneti Marelli, Johnson Controls, Pirelli, Rieter and Toora.

(Source: Fiat, 13th February 2004)

Image Gallery

Related Stories

Design the Fiat Panda of the future and win a scholarship for IAAD

Design the Fiat Panda of the future and win a scholarship for IAAD’s Transportation Bachelor Degree Course

IAAD - the Italian University for Design has launched a competition to award scholarships for the Bachelors course in Transportation Design, which will begin in October 2020.
Peugeot Inception Concept

Peugeot Inception Concept

At CES 2023 PEUGEOT has unveiled the fully electric Inception Concept, a technology and design showcase featuring a distinctive interior and a design language that will be adopted on production models from 2025.
Audi activesphere Concept

Audi activesphere Concept

Audi has presented activesphere, a 4-door crossover coupé that transforms into a pickup, featuring a very pure exterior design, variable ground clearance, and innovative technologies including augmented reality headsets.


Leave a Comment


Get all the updates with our weekly newsletter!

Find a Car

Scroll To Top
Scroll To Bottom