Drawing, Deep Drawing and Stamping

Il problema del rumore nello stampaggio a caldo

by: Agenzia Regionale per la Protezione Ambientale (Piemonte) | Document type: ARTICLE | Source: Agenzia Regionale per la Protezione Ambientale (Piemonte)
Published on 7 February 2005
Adding flexibility to stamping operations

Adding flexibility to stamping operations – The roles of material handling and group technology analysis

by: David J. Wage | Year: 2002 | Document type: ARTICLE | Source: TheFabricator.com
Published on 7 February 2005

Identifying Sources of Variation in Sheet Metal Stamping

by: Majeske, K.D., and Hammett, P.C. | Year: 2002 | Document type: PAPER
Published on 7 February 2005

High Strength Steel Stamping Design Manual

Year: 2000 | Document type: MANUAL | Source: Auto/Steel Partnership
Published on 7 February 2005
Next generation stamping dies

Next generation stamping dies – Controllability and Flexibility

by: Jian Cao, Brad L. Kinsey, Hong Yao, Vikram Viswanathan, Nan Song (Northwestern University) | Year: 2001 | Document type: PAPER
Published on 7 February 2005
Key design principles for successful deep drawing

Key design principles for successful deep drawing

by: Art Hedrick | Year: 2001 | Document type: ARTICLE | Source: TheFabricator.com
Published on 7 February 2005

Coupled Sheet Metal Forming and Fatigue Simulation

by: Y. Le Roch, J.Y. Berard, , E. Mouatassim (Renault, Direction de l'Ingénierie Véhicule), J.L. Duval (Renault, Direction de la Recherche), E. Di Pasquale (Simtech) | Year: 1998 | Document type: PAPER | Source: Simtech
Published on 7 February 2005

Analisi F.E.M. del ritorno elastico di componenti in lamiera stampata

by: F. Campana, G. Santucci (Dipartimento di Meccanica e Aeronautica, Università di Roma “La Sapienza”), M. Sasso (Dipartimento di Meccanica, Università di Ancona) | Year: 2002 | Document type: PAPER | Source: AIAS '02
Published on 7 February 2005

Analysis and Design of Slow Build Studies During Sheet Metal Assembly Validation

by: Guzman, , L.G., and Hammett, P. C. | Year: 2001 | Document type: PAPER
Published on 7 February 2005
Design rules for forming aluminum stampings

Design rules for forming aluminum stampings – Part 1

by: ERC/ NSM, Taylan Altan | Year: 2002 | Document type: ARTICLE | Source: TheFabricator.com
Published on 7 February 2005
Optimal design of metal forming die surfaces with evolution strategies

Optimal design of metal forming die surfaces with evolution strategies

by: O.Schenk, M.Hillmann | Year: 2004 | Document type: PAPER
Published on 7 February 2005

Recent Development in Inverse Simulation of Sheet Metal Forming

by: Jean-Louis Duval (Renault Direction de la Recherche), Edmondo Di PAsquale, Vincent Rigaud (Simtech) | Year: 1998 | Document type: PAPER | Source: Simtech
Published on 7 February 2005
Deep drawing aluminum

Deep drawing aluminum – not as hard as it looks

by: Art Hedrick | Year: 2002 | Document type: ARTICLE
Published on 7 February 2005
Deep drawing irregular sheet components: How cushion systems and die stiffness affect the operation

Deep drawing irregular sheet components: How cushion systems and die stiffness affect the operation

by: Prof. Dr.-Ing. H.c. Klaus Siegert | Year: 2001 | Document type: ARTICLE | Source: TheFabricator.com
Published on 7 February 2005

Quality function approach to design and optimization of stamping process: application to an industrial case

by: D. Luet, J.L. Duval (Renault, Direction de la recherche), E. Di Pasquale, V. Rigaud (Simtech), Y. Le Roch (Renault, Direction de l'Ingénierie Véhicule) | Year: 1998 | Document type: PAPER | Source: Simtech
Published on 7 February 2005
Advances in warm Forming Technology for Aluminum Alloy Sheet

Advances in warm Forming Technology for Aluminum Alloy Sheet

by: Daoming Li, Zhen Guo, Alexandru Riposan and Amit Ghosh (Dept. of Materials Science & Engineering, The University of Michigan) | Year: 2002 | Document type: PRESENTATION | Source: University of Michigan

The need for Fuel Savings and Structural Weight Reduction in vehicles is driving the replacement of Steel by Aluminum. But formability of Al alloys is half that of steels. This poses a major economic barrier to its application.

Published on 7 February 2005

Automotive Sheet Steel Stamping Process Variation

Year: 1999 | Document type: REPORT | Source: Auto/Steel Partnership
Published on 7 February 2005

New requirements and recent development in sheet metal stamping simulation

by: Fouad EL KHALDI , Marc LAMBRIKS (ESI GROUP) | Year: 2002 | Document type: PAPER
Published on 7 February 2005

8 DAYS LEFT!
CIRCUL-A-THON Design Challenge by SABIC

CIRCUL-A-THON Design Challenge by SABIC

This competition is open to students and professionals – and asks for their most compelling and futuristic circular designs. $50,000 in prizes are up for grabs!

Deadline for Submissions: April 1st, 2023

more information


Newsletter

Get all the updates with our weekly newsletter!

Find a Car

Random Tutorials

Recent News

Recent Publications


© 2004-2023 VAT IT 07892041000

Scroll To Top
Scroll To Bottom