Hyundai i-flow

Concept Cars 8 Mar 2010
Hyundai i-flow

Previewing a production hybrid model that will debut in early 2011, the Hyundai i-flow Concept is a laboratory vehicle that combines a streamlined flowing body with innovative materials and technologies such as flexible solar panel roofing and a thermo-electric generator.

Hyundai I Flow ConceptAt the 2010 Geneva Motor Show Hyundai has presented the i-flow Concept, an experimental car that previews a production sedan set to be launched in early 2011.

The i-flow concept evolves the company’s new form language, ‘fluidic design’, which is reflected in the aerodynamic efficiency of the body (the cd is just 0.25) which helps to reduce the car’s CO2 output to just 85g/km.

The i-flow Concept (or HED-7) is the seventh concept cars developed at the Russelsheim styling studio.

With an overall length of 4,780mm, a 2,800mm wheelbase, 1,850mm width and 1,420mm height the i-flow is four-door coupé rather than a traditional D-segment sedan.

The exterior design is characterized by flowing lines, B-pillarless doors, a long tail and short front overhangs, inspired by aerodynamic motives. Aerodynamic active elelents include the adaptive front spoiler and the side rocker blade.

Hyundai I Flow Concept Hyundai I Flow Concept

The interior echoes the ‘flowing’ theme and is characterized by a bionic feel, underlined by the ultramodern lightweight seats and the dashboard treated with Elastoskin, a sprayed skin.

Hyundai I Flow Concept Interior Hyundai I Flow Concept InteriorHyundai I Flow ConceptContinuous lines sweep from the dashboard, through the doors to the open storage area at the rear.

The i-flow adopts Hyundai’s first diesel hybrid powertrain – a 1.7-liter engine with two-stage turbocharging coupled with a Lithium Ion-Polymer battery – and features next-generation materials and technologies developed in cooperation with chemical company BASF.

Additional technical highlights include a six-speed, dual-clutch transmission.

The i-flow is a test bed for new energy harvesting ideas, ranging from flexible solar panel roofing to a thermo-electric generator which uses exhaust heat to produce power. 

From the official Press Release:

Design – The evolution of ‘fluidic sculpture’

Hyundai I Flow ConceptThomas Buerkle, Chief Designer at Hyundai Motor Europe, appraises the design concept of i-flow, or HED-7, the seventh in a series of daring concept cars to be born in the Russelsheim styling studio:

“The first impression of i-flow is the striking appearance generated through feminine sculptural layers combined with broad, athletic proportions.

"The rearward-oriented peak of the roof and distinctive main volume give an ultra-modern interpretation of the sedan genre. These unique proportions are complemented by the long tail and the short front overhang, features which were inspired by aerodynamic motives.

Hyundai I Flow Concept“Sporting intentions are emphasized through innovative active aero elements, such as the adaptive front spoiler and side rocker blade.

"Sophisticated, futuristic front and rear light elements are cradled like sparkling jewels within the car’s flowing planes, and the signature Hyundai hexagonal grille completes the frontal aspect.

“The sense of agility and focused aerodynamics is further enforced by the glass roof., with its semi-transparent dye-sensitized solar cells connecting the front and rear screens to create an integral design unit.

"The roof and door glazing blend to form a unified shell, undercutting the floating C-pillar to produce an undisturbed, aerodynamic canopy. These daring, refined details complement the i-flow’s overall appearance to culminate in a bold design statement which advances Hyundai’s fluidic sculpture philosophy.”

Interior Design

Hyundai I Flow Concept Interior The interior of i-flow redefines the perception of space in a sedan bodystyle. Fundamental elements, such as the seats and center console, were crafted for minimal weight and volume using cutting-edge materials from BASF.

The seats, for example, were developed using advanced stress analysis, which highlighted the unnecessary mass areas and pointed towards an optimized lightweight seat structure.

‘Steron’, a BASF material, gives the seats a highly-resilient quality, excellent breathability and a high-tech touch.

The upper dashboard, meanwhile, is treated with Elastoskin, a sprayed skin from BASF for a sophisticated, shimmering finish.

This approach combines with an abundance of natural materials to engender a bionic feel in the cabin, further symbolized by the green color tones and the leaf-like shadows projected from the roof’s semi-transparent dye-sensitized solar cells.

Hyundai I Flow Concept InteriorHyundai I Flow Concept Interior

The cockpit’s main interface centers around an expansive, contoured screen, which recognizes not only touch but also gestural inputs along its fascia-wide display.

The fluidic forms of the exterior are echoed in the i-flow’s cabin, where continuous lines sweep from the dashboard, through the doors to the open storage area at the rear.

The innovative, B-pillarless doors allow comfortable ingress and egress for passengers. The front door is hinged at the A-pillar, and the rear door swings backwards on an intelligent hinge arm system to allow unrestricted access to the rear seats. Additionally the front seats can be turned 30° towards the outside, to invite the driver and co-driver to enter the ultramodern lightweight seats.


Hyundai I Flow ConceptThe i-flow is a test bed for new energy harvesting ideas, ranging from flexible solar panel roofing to a thermo-electric generator. The key technical components of the vehicle have been developed by Hyundai under the Blue Drive™ banner in cooperation with BASF. Blue Drive™ remains at the heart of Hyundai’s product development strategy, and continues to drive the company towards its target of global leadership in environmentally-sensitive technologies.

A focal point of i-flow is its extraordinary CO2 emissions level of just 85g/km. The car uses efficient aerodynamics, energy harvesting technologies and weight-saving materials to significantly undercut the current average for a D-segment sedan.

Furthermore, the company’s first diesel-electric hybrid powertrain runs the exciting new U2 1,7-liter engine augmented by two-stage turbocharging and Hyundai’s Lithium Ion-Polymer battery to give a very efficient and advanced combination, particularly when partnered with i-flow’s six-speed, dual-clutch transmission.

Hyundai I Flow ConceptBASF and Hyundai R&D engineers have developed thermal engine encapsulation, which ensures that the engine reaches optimum operating temperature more quickly, by retaining heat when the car is at idle.

Where a non-insulated engine would take three hours to drop to 40°C, the i-flow will stay above that temperature for 14 hours. This translates into fuel savings and emissions cuts of 5 per cent during summer and up to 9 per cent during winter.

Another pioneering technique introduced in collaboration with BASF is thermo-electric waste heat recovery.

This process equates to further reductions in fuel consumption, 5% at highest driving. In fact, up to half of the electrical energy consumed by i-flow at 80kph – 250 watts – can be recovered through the work of a thermo-electric generator. Harvested energy from hot exhaust gases is recaptured by this generator which is fitted into the exhaust manifold. The thermal electric generator then converts the wasted heat into useful electrical energy to help power auxiliary systems.

Liquid Metal, a coating with the appearance of a glossy skin made of liquid metal, has been developed by BASF Coatings. Special effect pigments in this eco-friendly waterborne coating system let the surface appear as polished metal with targeted mirror like reflections – this gives a liquid skin appearance to the car’s exterior and increases the tension of the surface in the same time. The high color saturation on the i-flow adds an energizing charisma to the Hyundai concept car. The typical high contrast between highlight and flop underlines the sculptural impact of the i-flow.

Hyundai I Flow ConceptAdaptive aerodynamic features harmonize with fluidic sculpture styling, not only to bring aesthetic value, but also to increase fuel efficiency. Radical ideas, such as the arch-like roofline and streamlined front, have a real impact, and the boat-tail shape and kick-up lines force the airflow to separate at the rear of the vehicle, leading to an extremely impressive aerodynamic drag coefficient of just 0.25 Cd.

An eco-driving guidance system is present to encourage super-efficient motoring. The system includes fuel consumption and gear shift indicators, and an active ECO function which adjusts the powertrain to its ultimate condition by adapting the engine and transmission control units. Finally, ‘eco route’ uses real-time traffic conditions and three-dimensional road data to calculate the most fuel-efficient way of reaching the desired destination.

(Source: Hyundai)

Image Gallery

Related Stories

Opel Experimental Concept

Opel Experimental Concept – Design Gallery

The offial sketches and renders of the 2023 Opel Experimental Concept, a study presented at the 2023 IAA Mobility in Munich.
Hyundai i-flow: the design

Hyundai i-flow: the design

The official video presentation of the Hyundai i-flow Concept, inclusing details on the design and develpopment of the show car unveiled at Geneva 2010.

“GM’s Marvelous Motorama” at Petersen Automotive Museum celebrates Dream Cars from the 1950s

The Petersen Automotive Museum will celebrate “Dream Cars” from the 1950s with the exhibit “GM's Marvelous Motorama: Dream Cars From the Joe Bortz Collection,” which will open on March 16, 2024.


Leave a Comment


Get all the updates with our weekly newsletter!

Find a Car

Scroll To Top
Scroll To Bottom