Honda develops new technology to join steel and aluminum

tags: , , | in: Technology 19 February 2013
Honda develops new technology to join steel and aluminum

Honda has announced the development of a new technology to join steel and aluminum that enables the adoption of aluminum for outer car body panels. The first production application is the new 2014 Acura RLX.

share:

The technology allows to replace outer body panels – conventionally made of steel – with new, lighter ones in aluminum.

2014 Acura RLX 2014 Acura RLX

The first mass-produced application is the outer door panel of the 2014 Acura RLX, which will go on sale in the United States in March 2013, but the technology is expected to be adopted sequentially to other models.

Below we report some details from the official document.

Lock Seam technologyTo join together the dissimilar metals of steel and aluminum, the simultaneous establishment of several different technologies was required such as technologies to prevent corrosion (electrical corrosion) and thermal deformation caused by the different expansion rates of steel and aluminum.

Honda developed three technologies that enabled adoption of aluminum for the outer door panel.

  • Technology to join dissimilar materials: adoption of “3D Lock Seam” structure, where the steel panel and aluminum panel are layered and hemmed together twice.
  • Technology to control thermal deformationTechnology to prevent electrical corrosion: adoption of highly anticorrosive steel for the inner panel and a new form that assures the complete filling of the gap with adhesive agent.
  • Technology to control thermal deformation: adoption of adhesive agent with low elastic modulus and optimized position of the 3D Lock Seam.

The advantages of these new technologies include elimination of a spot welding process required to join conventional steel door panels.

Moreover, these technologies do not require a dedicated process; as a result, existing production lines can accommodate these new technologies.

The new technology contributes to the improvement of fuel economy and dynamic performance of the vehicle by reducing door panel weight by approximately 17% compared to the conventional all-steel door panel.

In addition, weight reduction at the outer side of the vehicle body enables to concentrate the point of gravity toward the center of the vehicle, contributing to improved stability in vehicle maneuvering.

2014 Acura RLX

Honda has been making a number of efforts to further reduce vehicle weight. In 2012, with the North American version of the all-new 2013 Accord, Honda began mass-production of a front subframe featuring the steel-aluminum hybrid structure that was made possible by the Friction Stir Welding (FSW) technology.

(Source: Honda via Motor Authority)

Comments

Leave a Comment

  1. Marcin Majchrzak

    2104? Really futuristic

    19/2/2013 (via Facebook)

Find a Car